EN
Air Filter 50mm 0.22 PTFE
GREEN MALL Air Filter
50mm filters are ideal for venting of fermenter and bioreactor, gas purifying, gas sterile filtration, and in-line vacuum pump protection. Featured by 19.6cm2 filtration area and stepped hose barb connections, it is provided with EO sterile packing and non-sterile packing.
- Overview
- Recommended Products
Features and Benefits
● 7-13mm stepped hose barb connection with female luer slip interior
● Wide range of filter media
● Available in various pore sizes
● Larger filtration area, larger air/gas flow rates
Quality
● Filters produced in a controlled environment
● Manufactured according to ISO9001 certified Quality Management System
Specification
Materials of Construction | ||
Filter Media |
Hydrophobic PTFE/Hydrophobic PVDF/PP/GF (PP or GF is optional for pre-filtration layer) |
|
Support & Drainage |
PP |
|
Sealing Technology |
Thermal Welding(No Adhesives) |
|
Dimensions | ||
Outer Diameter |
PTFE |
65mm |
PVDF/PP/GF |
60mm |
|
Inlet/Outlet connections | ||
7-13mm stepped hose barb connection with inner 6:100 luer slip | ||
Filtration Area | ||
≥19.6cm2 | ||
Ratings, μm | ||
0.22, 0.45, 0.65, 0.8,1.0, 3.0, 5.0 | ||
Bubble Point(PTFE 0.22 m) | ||
≥900mbar, 60%IPA | ||
Air Flow Rate | ||
≥25L/min @1bar | ||
Maximum Operating Temperature | ||
60 ℃/140 ℉ | ||
Forward Maximum Operation Pressure | ||
3.0bar@23℃;2.5bar@60℃ | ||
Sterilization | ||
By autoclave at 121℃, 20min or EO | ||
